Device diagnostics · Basic in the browser, proactive in the app

The truth about any device, in seconds.

Basic diagnostics runs in the browser and needs nothing installed. It checks the device's serial or IMEI against the registry and every theft or loss report on our network, alongside the hardware, network and security tests. Proactive diagnostics runs from our app, monitoring each device so problems are identified and predicted before they become failures.

Basic is web aloneProactive runs from the appStolen & missing check includedResults in seconds

Limited timeFull report unlock: ₦500₦1,500

Report ID verified
techsosten.com/diagnostics/report/8F3K-22QX

Diagnostics report

Pixel 8 · Serial ••••2291

8F3K-22QX
  • Display & colourPass
  • Battery levelWarn
  • Speaker outputFail
  • Network throughputPass
  • Security posturePass
  • Stolen or missing reportPass

Ran locally in the browser · Completed in 8.2 s · Estimates excluded by design

Proactive alert

Battery capacity down 12% since baseline on Device #0142.

Today, 09:14

Seconds

to a complete, shareable report

Nothing

to install, no account needed

Every run

stored with a verifiable report ID

Zero

estimates — if the browser can't know it, we don't guess it

Two ways to run it

Basic in the browser. Proactive in the app.

Basic diagnostics is web alone — nothing to install. Proactive diagnostics is the app tier: it monitors the device, identifies issues and predicts them before they become failures.

Device Diagnostics — Basic

Web only

The fastest way to see what you are actually holding. It runs entirely in the browser — no install, no app, no account — and reads the exact model, operating system, hardware, media and network details your device reports. The whole run is saved, so you can come back to it or hand the ID to a technician.

Honest scope: a browser cannot read a serial number, an IMEI or battery wear — no browser API exposes those, on any platform. We capture what the device genuinely reports and say so.

Run a basic check-up

Paste the report ID — or the whole link — and we will open it.

Every check-up is saved with its own ID.

What it captures

  • Exact device type, operating system and browser version
  • Screen resolution, pixel density and colour capability
  • Processor threads and approximate memory
  • Graphics adapter and rendering capability
  • Storage available and network quality
  • Display, touch, speaker, microphone and camera checks
  • Codec and DRM support for video and audio
  • Security posture: HTTPS, crypto and WebAuthn
  • Serial or IMEI checked for a reported theft or loss
  • Saved automatically with its own report ID
Recommended

Device Diagnostics — Proactive

App · Scheduled · Continuous

The app tier. Our app monitors each device on the schedule you set, comparing every run against a baseline, so issues are identified and predicted rather than discovered after the failure. Instead of a snapshot you get movement — act on the trend before the device stops working.

What it adds

  • Everything in Basic, run on a schedule
  • Runs from the app, unattended
  • Baseline capture, then comparison on every run
  • Trend tracking: battery, throttling, storage, network
  • Predicts a failing part before the device stops
  • Alerts when a metric crosses the threshold you set
  • Full device history keyed on serial number or IMEI
  • Fleet view with per-device and per-site rollups
  • API, webhooks and exportable audit trail

Why it's different

Evidence you can hand to anyone.

Spec sheets and gut feel don't settle disputes. The device's own results do — captured, stored and verifiable.

One report. Three verdicts. Zero hand-waving.

Every test returns pass, warn or fail, and every run gets a report ID anyone can verify later — share it, print it, or settle a dispute with the record from the day it was checked.

Report ID

8F3K-22QX

Verified
Share linkPrint / PDFAudit trail

Movement, not moments.

Proactive compares every run against the device's baseline, so a battery losing capacity or a machine starting to throttle shows up as a trend — before it becomes a failure.

Baseline · day 1Today · −12%

Alerts on your terms

Thresholds you set. Devices get flagged on evidence, not on a schedule.

History per device

Every run stored against the serial or IMEI — the whole life of the device in one place.

Fleet to single device

Per-device and per-site rollups, from one phone to a thousand.

APIs and webhooks

Pipe results into your ticketing, claims or inventory systems.

Methodology

What we measure — and what we refuse to guess

Every result in a report falls into one of three buckets. Knowing which is which is what makes the report trustworthy.

Exact

Verbatim facts the browser answers authoritatively — codec support, secure context, input capability, display geometry.

Measured

Real readings that vary with load, network and thermals — benchmark timings, frame rate, throughput, latency.

Never estimated

Anything the browser can only approximate — total storage, device memory, IP location — is excluded from the report.

The process

Four steps. Nothing to install.

  1. 1

    Open the check-up

    No install and no account. The device runs its own tests in the browser.

  2. 2

    Confirm the device

    Add the manufacturer, model and serial or IMEI so results are tied to one physical device.

  3. 3

    Get the report

    Pass, warn or fail per test, with a report ID anyone can verify later.

  4. 4

    Keep it honest

    Trends and alerts continue from the baseline, and estimates are excluded by design.

Who it serves

Built for people who need proof

One engine, four very different jobs — each report is shaped so the answer can be acted on.

Repairers

Evidence before and after a repair, and a record for warranty disputes.

Retailers

Grade a second-hand device at the counter and show the customer why.

Insurers

Verified condition at inception, with a baseline for the first claim.

IT teams

Fleet health at a glance and a shortlist of devices needing attention.

Compare

Basic vs proactive

The difference is time: basic is a moment, proactive is the history.

Feature comparison between basic and proactive diagnostics
AspectBasic (web)Proactive (app)
How it runsIn the browser — web alone, nothing to installFrom the app, scheduled and unattended
Time to first resultSecondsSeconds per run, insights build over time
What it capturesModel, OS, screen, processor, memory, graphics, storage, network, media, security, and theft/loss status for the serial or IMEIThe same, compared against a baseline over time
ScopeOne device, right nowOne device or a whole fleet, continuously
ReportsInstant report with a shareable IDEvery run stored, with history per device
Alerts—Threshold and trend alerts
Predictive—Flags a device before it fails
Best forA quick look before you buy, sell or hand a device overFleets, insurers, refurbishers, warranty cover
IntegrationShareable link and IDREST API, webhooks, white-label

Already have a report

Find a saved check-up

Every run is saved with its own report ID. Enter it — or paste the link we gave you — and we will open the report.

Paste the report ID — or the whole link — and we will open it.

Every check-up is saved with its own ID.

  • Every run is identified
  • Share the ID with a technician
  • Reopen it on any device

Questions

Common questions

What is the difference in one sentence?

Basic diagnostics answers “is this device healthy now?”, proactive diagnostics answers “is this device getting worse, and when should we act?”

Do we need to install anything?

Basic diagnostics needs nothing at all — it is web alone and runs in the browser. Proactive diagnostics needs our app installed, because the app is what monitors the device and reports the trend.

How exact are the results?

Only tests the browser can answer exactly are run. Measurements such as speed, frame rate and benchmark timings are reported as measured values, and anything the browser can only estimate — like total storage or device memory — is excluded rather than guessed.

Can it prove what a device was like before we sold it?

Yes. Every run is stored against the serial or IMEI with a report ID, so a later dispute can be settled with the record from the day it was checked.

Does proactive diagnostics replace a workshop inspection?

No. It is a remote, repeatable first line that finds trends and narrows the fault. Physical faults still need a technician — it tells you which devices need one, and why.

Find out what your device already knows

Run a free check-up on the device in front of you — then talk to us about putting the same tests on a schedule.